Need help?Do you have a question about the Electra COMPACT 9 and is the answer not in the manual?
Details for the 7,000 BTU models including capacity and input.
Details for the 9,000 BTU models including capacity and input.
Details for the 12,000 BTU models including capacity and input.
Specifies the operational limits for cooling, heating, and voltage.
Illustrates refrigerant flow during cooling for heat pump models.
Illustrates refrigerant flow for cooling-only models.
Guidelines for bending tubes and tightening connections.
Guidelines for selecting appropriate installation locations.
Specifies electrical safety and connection standards.
Steps for installing the indoor air conditioning unit.
Details on connecting indoor and outdoor units electrically.
Steps for connecting the refrigerant lines between units.
Details electrical safety and indoor unit panel removal.
Key safety and installation warnings for the user.
Setting and managing timer ON, OFF, and ON/OFF modes.
Modes protecting against low/high outdoor temperatures and freezing.
Modes protecting against outdoor icing and overheating.
Warnings regarding power cord and operation.
Troubleshooting steps if the unit is not powered on.
Troubleshooting issues with remote control response.
Checks for no airflow from the indoor unit.
General| Type | Split System |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
| Noise Level (Outdoor) | 50 dB |
To Next Page