INTRODUCTION
1-1SM PXD 1-E.3 GB
1. INTRODUCTION
1.1 General
The PXD split floor and ceiling units range comprise the ST (cooling only) and RC (heat
pump) models, as follows:
• Cooling Only PXD9ST PXD12ST PXD15ST
PXD18ST PXD24ST PXD30ST
• Heat Pump PXD9RC PXD12RC PXD15RC
PXD18RC PXD24RC PXD30RC
1.2 Main Features
The PXD series benefits from the most advanced technological innovations, namely :
• R410A
• Microprocessor control.
• Infrared remote control, and on unit.
• Possibility for treated air distribution to adjacent room (Accessory kit).
• High COP.
• Easy access to the interconnecting tubing and wiring connections.
• Possibility to connect a condensate pump kit with an integral over flow
protection (Accessory kit).
• Automatic treated air sweep (horizontal and vertical)
• Low indoor and outdoor noise levels.
• Easy installation and service.
1.3 Indoor Unit
The indoor unit can be mounted as floor or ceiling type, no special adjustment
are needed. it can be easily fitted to many types of residential and commercials
applications.
It includes:
• Casing with inlet and outlet grilles.
• Motorized flaps (Horizontal and vertical).
• Advanced electronic control box assembly (storm 10V7).
• Coated indoor coil.
• Mounting plate
1.4 Filtration
The PXD series presents several types of air filters:
• Easily accessible, and re-usable pre-filters (mesh)
• Active carbon filter.
To Next Page
Loading...
