•
Remove the battery pack by carefully lifting
clear of the scooter chassis (Fig.14).
•
Warning, these parts are heavy!
•
Remove the shopping basket by lifting /
sliding up (Fig.15).
Lock the steering position by lifting up the
yellow knob and then turn to the central
position and release
(Fig.16). Lock the steering
with
the wheels pointing straight forwards. See
Tiller Folding & Tiller Lock section.
•
Fold the tiller unit down by first loosening
the tiller wheel (rotate anti-clockwise). L
tiller to the desired position and then re-
wheel (clockwise). See
Tiller Folding & Tiller Lock
section.
•
Separating the Chassis. The two halves of the
c
hassis can also be split apart to make
transportation easier. To do this, squeeze
Release Lever (yellow) as shown
with one hand.
With the other hand grasp the handle at the rear of
the scooter and pull
which will separate the front
and rear halves (Fig.18).
Avoid pinching
your fingers between the two halves
of the chassis.
•
Safely stow the component parts securely and
safely within the vehicle.
Warning! Do not attempt to lift any of the
scooter components unless you are capable of
doing so. The weight for each component
shown in the Technical Specification section.
Warning! Do not attempt to lift the chassis
unassisted - back or other injury may result!
15
To Next Page
Loading...
