EasyManuals Logo
Home>ElectrIQ>Dehumidifier>CD10L-V4

ElectrIQ CD10L-V4 User Manual

ElectrIQ CD10L-V4
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
5
INSTALLATION
Remove any water from within the water tank before starting the unit. In order to save energy do not open
windows or doors while the unit is running. Place the unit on a hard / flat surface. On first use run the unit
continuously for 24 hrs.
TO REDUCE NOISE LEVELS:
Place a piece of carpet or a rubber mat under the unit to reduce any vibrations while the unit is running.
The CD10L dehumidifier uses compressor technology to extract water from the environment. Compressor
dehumidifiers are ideal for normal domestic or office environments which are heated during the winter
months and maintain a temperature above 12-15⁰C.
The dehumidifiers are lightweight and easy to move. They are designed to extract unwanted humidity
while saving money due to their power saving logic. They feature an intelligent humidistat where the
desired relative humidity can be adjusted in increments of 5% between 30 and 80% ensuring your room is
not dried too much and power is not wasted.
POSITIONING THE DEHUMIDIFIER
A badly positioned dehumidifier will have little effect. In
positioning the dehumidifier please ensure circulation of air
in not restricted around the unit.
Allow at least 20 cm space around the unit. This dehumidifier
is designed only for indoor residential or small office
applications and any commercial or industrial use will
invalidate the warranty.
Use in an enclosed area for maximum efficiency. Close all
doors, windows to create an effective operating
environment. Do not use outdoors.
Your electriQ dehumidifier will begin to protect your space from the harmful effects of excessive moisture as soon as it is
turned on. Excess moisture is dispersed throughout your home. For this reason, the dehumidifier should be positioned in
a central and clear location so that it can draw this moist air towards it from all over the home. A warm hallway or landing
is an excellent position for your dehumidifier. If possible, leave interior doors ajar to allow air circulation.
Alternatively, if you have a serious problem in one area you can begin by positioning the dehumidifier there and moving it
to a more central location at a later date. For the most effective use, run your dehumidifier with external doors and
windows kept closed. Please note the unit should not be placed directly against a radiator or other heat source.
Before moving the appliance the water tank should be emptied. The handle on the appliance is designed to aid in its
movement and should not be used to support the full weight of the dehumidifier. When carrying the unit, it should be
kept upright and suifficiently supported from its base. The handle should not be used if there is any signs of damage to its
fixings.
When positioning your electriQ dehumidifier, ensure that it is placed clear of any obstacle that may limit the air movement.
Place the dehumidifier on a flat dry surface.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ElectrIQ CD10L-V4 and is the answer not in the manual?

ElectrIQ CD10L-V4 Specifications

General IconGeneral
BrandElectrIQ
ModelCD10L-V4
CategoryDehumidifier
LanguageEnglish

Related product manuals