ElectrIQ ECOSILENT8 User Manual (English)

Questions and Answers:

S
Stephen HartmanAug 14, 2025
Why is my ElectrIQ ECOSILENT8 Air Conditioner not cooling properly?
- K
  kimparkerAug 14, 2025
  Several factors can impact the cooling performance of your ElectrIQ Air Conditioner. Direct sunlight can increase the heat in the room, so use curtains to reduce it. Open doors or windows, a large number of people, or other heat sources like fridges can also affect cooling; try closing doors and windows and increasing the air conditioning power. A dirty filter screen can restrict airflow, so clean or replace it. Finally, check that the air inlet and outlet are not blocked and that the venting is correct, ensuring the hose isn't bent.
L
lopeztimothyAug 17, 2025
What to do if my ElectrIQ ECOSILENT8 does not work?
- M
  Marcus MorganAug 17, 2025
  If your ElectrIQ Air Conditioner isn't working, first, ensure it's properly connected to a socket with electricity and turned on. If the display shows "E7", discharge the water inside. The unit is designed to function within a specific temperature range of 7-35oC (44-95oF), so check that the ambient temperature is within this range. If you're in cooling mode, verify that the room temperature isn't lower than the desired temperature and adjust accordingly. In dry mode, ensure the ambient temperature is above 17 oC (62 oF).
S
Sara RobertsAug 21, 2025
How to fix ElectrIQ ECOSILENT8 remote control that is not working?
- M
  michaelspearsAug 21, 2025
  If your ElectrIQ Air Conditioner remote control isn't working, first, make sure you are close enough to the air conditioner and that the remote control directly faces the receiver. If that doesn't work, replace the batteries.
J
James GeorgeAug 25, 2025
What to do if ElectrIQ Air Conditioner compressor does not work?
- T
  Toni Nelson MDAug 26, 2025
  If the compressor on your ElectrIQ Air Conditioner isn't working, it might be due to overheat protection. Wait for 3 minutes until the temperature is lowered, and then restart the machine.
J
Jorge GonzalesAug 28, 2025
What does error code E7 mean on ElectrIQ ECOSILENT8 Air Conditioner?
- N
  Nicholas HayesAug 28, 2025
  Error code E7 on your ElectrIQ Air Conditioner indicates that you need to empty the water tank.
J
Jack HernandezSep 1, 2025
What does it mean 'dH' on ElectrIQ ECOSILENT8 Air Conditioner?
- A
  Andrew BradySep 1, 2025
  The 'dH' code on your ElectrIQ Air Conditioner is not a fault, so no action is required.
J
Joshua SmithSep 5, 2025
What does E4 error mean on ElectrIQ Air Conditioner?
- K
  Kristen KnappSep 5, 2025
  If your ElectrIQ Air Conditioner displays error code E4, check to ensure the filters are clean, the vent pipe is not restricted, and the room temperature is within the operational range.
K
Kyle WhiteSep 8, 2025
What does mode light flashing mean on ElectrIQ Air Conditioner?
- M
  margaretfergusonSep 9, 2025
  If the mode light is flashing on your ElectrIQ Air Conditioner, it means the unit will start operation when the protection period has finished, which is approximately 3 minutes.

ElectrIQ ECOSILENT8 Specifications

General

Type	Portable Air Conditioner
Cooling Capacity	8000 BTU
Energy Efficiency Ratio (EER)	2.6
Noise Level	52 dB
Power Supply	220-240V, 50Hz
Refrigerant	R290
Remote Control	Yes
Sleep Mode	Yes
Air Filter	Yes
Warranty	1 year
Timer	24 hours
Operating Temperature Range	16°C - 35°C