ELECTRO FREEZE SOFT SERVE TWIST SL500 - User Manual

OPERATOR'S MANUAL
with Replacement Parts List
H.C. Duke & Son, LLC P/N 184599 October 2013 Printed in USA
SOFT SERVE
TWIST MODEL
SL500
184599 10/13

Summary

SAFETY FIRST!

Recognize Safety Information

Alerts users to safety alert symbols for injury prevention.

Understand Signal Words

Explains DANGER, WARNING, and CAUTION signals used in the manual.

Follow Safety Instructions

Operate Safely

Safety Decal Locations

Note to Installer

Uncrating and Inspection

Installation

Electrical Requirements

Electrical Connections

Operator Controls and Indicators

Selector Switch

Reset -Overload

Mix Feed Tube & Regulator

Disassembly and Cleaning

Disassembly Instructions

Cleaning Instructions

Assembly

Start-up Instructions

Sanitizing

Details the process of sanitizing the hopper and cylinder for hygiene.

Priming

Closing Procedures

Draining Product from Freezer

Routine Maintenance

WINTER STORAGE

Troubleshooting Tables

Unit does not operate

Leakage of mix or water from drain tube to drip tray

Compressor does not operate or operates improperly

Dispensed product too soft

Product dispenses slowly out of dispensing head

Dispensed product too hard

Freezer runs continuously and product gets too cold

Compressor and beater motor operates only when dispensing

Compressor and beater motor do not operate when dispensing

Compressor does not start hums intermittently (cycling on overload)

Poor or slow product recovery

Beater motor does not operate

Unit operates long or continuously

Discharge pressure too high

ELECTRO FREEZE SOFT SERVE TWIST SL500 Specifications