REVERB TYPE AND MINI KNOB DETAILS
Note: for every Reverb Type, the values of the mini knobs are “sticky”:
they’re remembered for each mode when switching between them. For
example, for the ROOM Reverb Type, you can dial in distinct Predelay
Feedback and Mod Depth settings for Mode 1 and Mode 2.
ROOM –
MODE: Selects between a lively room reverb from the EHX Cathedral
(Mode 1) and the beloved hall reverb algorithm from the EHX Holy
Grail (Mode 2).
P.D. FBACK: This knob controls the pre-delay feedback: the amount
of signal that is sent from the output of the pre-delay block back to
the input of the pre-delay block. With a pre-delay time long enough
to hear discrete echoes, turning the P.D. FBACK knob clockwise will
cause the pre-delay block to produce multiple echoes from one note.
Each echo then goes into the reverb block producing multiple reverb
washes from one note.
MOD DEPTH: Use this knob to add modulation to the room or hall
reverb. As you turn clockwise, the modulation gets wider. Set to fully
counterclockwise for no modulation.
To Next Page
Loading...
