DUAL REVERB
The Oceans 12 is a dual stereo reverb, meaning it offers two,
simultaneous, independent stereo reverbs: Reverb A and Reverb B.
Engaging both of them unleashes the dual reverb functionality of the
Oceans 12.
Turning on the dual reverbs is simply a matter of turning on each reverb
engine with its respective footswitch. When both are on, both of the
SELECT LEDs (pictured below) will be lit, with one of them slowly blinking
to indicate which one is currently selected for editing.
DUAL CONFIGURATIONS
When both of the reverb engines are engaged, their configuration is
always either SERIES or PARALLEL. These configurations are illustrated in
the diagrams below.
In SERIES, the two reverb engines are cascaded such that one processes
your instrument first before sending it to the other. The wet mix of the
first reverb engine is sent to the input of the second reverb engine. The
output of the second one then becomes the output of the Oceans 12:
To Next Page
Loading...
