12 is mistaking your footswitch for an expression pedal. Re-insert the
external footswitch jack until you get the correct LED confirmation.
3. Select ECHO reverb on the desired reverb engine. Tap the
corresponding connection (RING for Reverb A, TIP+RING for Reverb
B) of the external footswitch at least two times at a steady tempo.
The delay time will be set to your tapping speed, divided by the Tap
Divide setting selected the MODE button.
4. The TAP LED blinks at the rate of the current echo time on the current
reverb engine.
To Next Page
Loading...
