36
en | RE3-RX r eceiver
RE3 UHF
21.06 | 3 | F.01U.362.808 Installation manual Electro-
1
From the main menu, press the ▼ button to scroll down to
Antenna Power.
2 The display choices are ON or OFF.
3
To select, pressing the ▲ button toggles from OFF to ON,
and the ▼ button toggles from ON to OFF.
4 Press SET to save changes and return to main menu.
5
Either scroll ▼ down to Exit and press SET, or briefly press
SYNC on the receiver front panel to return to the home
screen.
OR
7.3.14 Keylock
The receiver can be set to Keylock mode, thereby preventing unwanted tampering with, or
changes to receiver parameter settings. Menu item 9, Keylock, accesses settings of either
on or off.
To turn Keylock ON
1
From the main menu, press the ▼ button to scroll down to
Keylock. Select by pressing SET to enter the Keylock screen.
2 The display shows the setting of OFF.
3 Use the ▲ button to toggle from OFF to ON.
4
Press SET to save changes. The display returns to the home
screen where the icon appears. Access to menus is now
LOCKED until unlock is performed.
To turn Keylock OFF
To Next Page
Loading...
Need help?
General
