UHF Wireless RE3-RX receiver | en 33
-Voice Installation manual 2018-12 | 01 |
4 Press SET to save changes and return to main menu.
5
Either scroll ▼ down to Exit and press SET, or briefly press SYNC
on the receiver front panel to return to the home screen.
OR
7.3.14 Keylock
The receiver can be set to Keylock mode, thereby preventing unwanted tampering with, or
changes to receiver parameter settings. Menu item 9, Keylock, accesses settings of either on or
off.
To turn Keylock ON
1
From the main menu, press the ▼ button to scroll down to
Keylock. Select by pressing SET to enter the Keylock screen.
2 The display shows the setting of OFF.
3
Use the ▲ button to toggle from OFF to ON.
4
Press SET to save changes. The display returns to the home
screen where the icon appears. Access to menus is now
LOCKED until unlock is performed.
To turn Keylock OFF
Entering the menus is not possible when Keylock is on. Keylock must be turned off to access
menus.
1 Press and hold SET for two seconds to enter Keylock screen.
2 The display shows the setting of ON.
3
Press the▼ button to toggle from ON to OFF.
To Next Page
Loading...
Need help?
General
