Electrohome DVC510E - Auto Power off

- 17 -
OSD Display
• Press VCR on remote control to change into
VCR mode.
1. Press SETUP on the remote control. The setup
menu is displayed.
2. Press [] Navigation button to select “Option”
and press OK.
3. Press [] Navigation button to select “OSD
Display”. Press OK repeatedly to select On or
Off.
4. Press SETUP to exit the menu.
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
OPTION
Select : Ok
OSD Display
Auto Power Off
Output Channel
ACS Set
Quit : Setup
On
Yes
Ch3
Off
Auto Power Off
• Press VCR on remote control to change into
VCR mode.
1. Press SETUP on the remote control. The setup
menu is displayed.
2. Press [] Navigation button to select “Option”
and press OK.
3. Press [] Navigation button to select “Auto
Power Off”. Press OK repeatedly to select Yes
or No.
4. Press SETUP to exit the menu.
OPTION
Select : Ok
OSD Display
Auto Power Off
Output Channel
ACS Set
Quit : Setup
On
Yes
Ch3
Off
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
ELECTROHOME DVC510E_EngP11-18.p65 5/3/2007, 9:47 AM17