EasyManua.ls Logo

Electrohome EAAC302 - Installing the Battery; Daylight Saving Time (DST); Summer Time

Electrohome EAAC302
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 13 -
Zone 6 - Alaska time
Zone 7 - Hawaiian time
OPERATING INSTRUCTIONS
INSTALLING THE BATTERY
1. Using a small Phillips Head screwdriver, loosen the screw on the battery panel on
the bottom of the unit.
2. Remove the battery compartment panel.
3. Remove/properly dispose of depleted battery and replace with new, 3V, CR2032
Flat Lithium battery.
4. Close the battery compartment and tighten the screw into place to secure battery
panel.
Batteries must be installed by an adult.
Use only the recommended size and type of battery specied.
Please be sure to follow the correct polarity when installing the battery
in the battery compartment. A reversed battery may cause damage to
the alarm clock.
When not using the unit for a prolonged period of time, please remove
the battery to avoid possible damage caused by a leaking battery.
DAYLIGHT SAVING TIME DST / SUMMER TIME
Daylight Saving Time/Summer Time is automatically preset.
Daylight saving time begins at: 2:00 AM on the second Sunday of March.
Standard time begins at: 2:00 AM on the rst Sunday of November.
Cancelling / reactivating Automatic DST / Summer Time
1. To CANCEL DST / Summer Time, press and hold the DST button for 3 seconds while
the radio is OFF.
2. 'OFF' will appear in the display to show that the Automatic DST/Summer Time
adjustment is cancelled. The display will return to the clock.

Other manuals for Electrohome EAAC302

Related product manuals