Electrolux Affinity - Page 57

Error Codes
E92
User interface and main board
communications error
Refer to test (11).
E93
Console or main board problem
Replace main control board.
E94
Main control problem
Replace main control board.
E97
Console or main board problem
Replace main control board.
E98
Communication protocol is incorrect
Replace main control board.
EA1
Power supply frequency is out of limits
Refer to Test (12).
EA2
Power supply voltage is too high
Refer to Test (12).
EA3
Power supply voltage is too low
Refer to Test (12).
EA5
Main voltage sensing failure
Refer to Test (12).
EAE
Line safety relay sensing failure
Refer to Test (12).