EasyManuals Logo

Electrolux CS 10 User Manual

Electrolux CS 10
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
21
Remove the plug from
the filling pipe.
Fill with descaling agent +
water.
(See table Descaling agent)
The buzzer stops during filling.
Fig 1.
The descaling procedure starts.
The agent acts for approx. 20 minutes.
After emptying the descaling agent,
followed by repeated rinsing and filling,
the buzzer sounds again and
the descaling procedure is complete.
The time display flashes "FILL"
Filling pipe
Press "Stop"
or
Open the door
The LED goes out.
It is advisable to rinse
the inside of oven
after descaling.
le Chef Descaling
Descaling should be
carried out when the LED
in the button "Descaling"
is on or at appropriate,
regular intervals.
Press "Descaling"
for 1.5 seconds.
The LED is on
during descaling.
Emptying and filling
of clean water takes
place.
After 2-3 mins.
the buzzer sounds.
The time display flashes "SOAP".
Check that the
water supply is on.
(tap/valve open)
The oven door
should be closed.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Electrolux CS 10 and is the answer not in the manual?

Electrolux CS 10 Specifications

General IconGeneral
BrandElectrolux
ModelCS 10
CategoryOven
LanguageEnglish

Related product manuals