Figure1
Figure2
Figure3
Setting Oven Controls
SETTINGSILENTCONTROLOPERATION
The_ or_ and_ or_ padscontro,theS,entCont,o,opera,onfeatureTheS,,ent
Control operation feature allows the oven control to be operated without sounds or beeps
whenever necessary. If desired the control can be programmed for silent operation and later
returned to operating with all the normal sounds and beeps.
To change control from normal sound operationto silent
control operation:
1. Press and hold _ or Q for 6 seconds. A beep will
sound,
"- -:- -" will appear, "UPPER" and "BELAY" will flash in the display
(Figure 1). After 6 seconds, a single beep will sound and "SP"
(speaker; Figure 2) or "--" (silent; Figure 3) appears in the display.
2. Press (_) or (_ to switch between normal sound operation and
silent operation mode.
3.
If "SP" appears (Figure 2), the control will operate with normal sounds
and beeps. If "--" appears (Figure 3), the control is in the silent
operation mode.
Press _ to accept the change or press _ or @ to reject the
BT_T _ _III:£L
change.
To Next Page
Loading...
