Electrolux EB SL7 - Steam Cleaning Process and Side Rails; Steam Cleaning Completion and Drying; Removing and Replacing Side Rails

electrolux 25
5. The duration of the process
(15 mins.) is shown on the display.
6. An acoustic signal sounds when
the programme has finished.
7. Press any button to switch off the signal.
8. Wipe out the oven with a soft cloth.
9. Remove any residual water from the
steam generator.Lay a dampened
sponge in the cooled steam generator.
Press the sponge firmly.Remove the
sponge and squeeze out the water.
To completely dry the oven, leave the
oven door open for around 1 hour.
Side Rails
To clean the sides of the oven, the left and
right side rails can be removed.
Taking out the side rails
1. Loosen the screw.
2. Pull the rails sidewards (1).
3. Lift the rails off the side attachments (2).
3 To remove/replace the side rails, open
the cover on the Meatprobe socket.
Replace the side rails
1. Set the rails in the rear attachment and
press into the griip on the side (1).