10. PROGRAMMING THE QUANTITY OF GROUND COFFEE
• This espresso machine has already been calibrated in factory to dispense
the ideal measure of ground coffee for one cup of espresso.
• However this quantity of ground coffee can be increased or reduced, then the
selected measure is stored. The programmable measure of ground coffee only
refers to one cup of coffee. Grinding time for selecting a measure of double coffee
is set automatically after the measure for a single coffee has been stored.
• Position the measuring spoon under
the funnel and press the grinder
button without releasing as it is
shown in the figure. The
programming mode will be activeted
after approximately 10 seconds and
the grinder will start.
• As soon as the measuring spoon is
full to the brim, release the button
and this quantity will automatically be
stored.
25
To Next Page
Loading...
