CHECKING ELECTRICAL
CONNECTIONS
Confirm the appliance is correctly connected by
switching on and observing the various oven
functions indicators.
The electronic timer will flash on and off.
CONNECTING TO A HOB OR
COOKER POINT
Either follow in general terms the instructions for
connecting to the terminal block or refer to the
hob suppliers installation instructions.
NOTE: HOUSE CIRCUIT
Earth leakage / continuity tests must be carried out
before the appliance is connected to the mains
supply and re-checked after fitting.
43
INSTALLATION INSTRUCTIONS
Feed the cable through the cabinet and
arrange to route the cable away from
the appliance.
To Next Page
Loading...
