Electrolux EDC2086GDW

This document is a user manual for the Electrolux EDC2086GDW Tumble Dryer, providing comprehensive instructions for its safe operation, maintenance, and troubleshooting.

Function Description

The Electrolux EDC2086GDW is a tumble dryer designed for household use, capable of drying cotton and synthetic fabrics. It offers various drying programs and options to suit different fabric types and desired dryness levels. The appliance includes a cool-down cycle at the end of each program to ensure items are left at a temperature that prevents damage. It also features a crease guard phase to minimize wrinkles in laundry. The tumble dryer is equipped with a compressor system that uses a special, fluoro-chloro-hydrocarbon-free agent, which must remain sealed to prevent leakage.

Usage Features

The tumble dryer is operated via a control panel featuring a program knob, a display, and several touchpads for various options.

Starting a Program: To start a program, first prepare the laundry by closing zippers and fasteners, removing items from pockets, and tying loose ties or ribbons. Load the appliance, ensuring laundry does not get caught between the door and the rubber seal. Activate the appliance by pressing the on/off button, then select the appropriate program and options for the load type. The display will show the program duration. Finally, press the Start/Pause touchpad to begin.

Delay Start: For delayed operation, set the desired program and options, then repeatedly press the delay start button until the desired delay time (from 30 minutes to 20 hours) is shown on the display. Press the Start/Pause touchpad to initiate the delayed start.

Changing a Program: To change a program, deactivate the appliance with the on/off button, then reactivate it and set the new program.

End of Program: At the end of a program, an intermittent acoustic signal will sound, and the condenser and water container indicators will flash. The appliance will then enter a crease guard phase for approximately 30 minutes to reduce wrinkles. Laundry can be removed before this phase is completed.

Stand-by Function: To conserve energy, the appliance automatically deactivates after 5 minutes if no program is started or after 5 minutes from the end of a program.

Program Options: The tumble dryer offers several options to customize drying cycles:

Time Drying: Available for the Time Drying and Wool programs (with a drying rack), allowing users to set the program duration from 10 minutes to 2 hours (or 30 minutes to 4 hours for Wool). This is recommended for small loads or single items.
Wool Load: Specific to the Wool program, this option allows users to increase the program duration for more thorough drying by repeatedly pressing the Wool Load touchpad.
Delicate: This option sets a delicate drying program with a low temperature, suitable for fabrics with the delicate symbol on their label (e.g., acrylic, viscose).

Adjusting Remaining Laundry Moisture Degree: Users can adjust the default remaining moisture degree of the laundry. After activating the appliance, wait 8 seconds, then press and hold touchpads (A) and (B) simultaneously. Indicators for maximum dry, more dry, or standard dry laundry will appear. Press button (E) repeatedly to select the desired level, then press and hold touchpads (A) and (B) again for 2 seconds to confirm.

Buzzer On/Off: To activate or deactivate acoustic signals, press and hold touchpads (B) and (C) simultaneously for approximately 2 seconds.

Child Lock Function: This feature prevents children from interacting with the appliance during operation, locking the program knob and touchpads while keeping the on/off button accessible. To activate, press the on/off button, wait 8 seconds, then press and hold touchpads (A) and (D) simultaneously until the child lock indicator appears. To deactivate, press and hold the same touchpads until the indicator disappears.

General Hints and Tips:

Avoid mixing fabrics with strong colors with light-colored items to prevent bleeding.
Use appropriate programs for cotton jersey and knitwear to prevent shrinking.
Ensure the laundry weight does not exceed the maximum load specified in the program table.
Only dry items suitable for tumble drying, as indicated on fabric labels.
For items with an internal cotton layer, turn them inside out so the cotton layer is external.
For optimal results, remove laundry promptly when the drying phase is almost complete or completed.

Maintenance Features

Regular maintenance is crucial for the appliance's performance and longevity.

Cleaning the Filter: The lint filter should be cleaned before or after each use.

Open the appliance door.
Pull the filter upwards to remove it.
Open the filter.
Remove lint from both parts of the filter.
If necessary, clean the filter with hot water.
Close the filter and reinsert it into its slot.

Draining the Water Container: The water container must be emptied after each program.

Pull out the water container.
Empty the water into a sink.
Reinsert the water container. The collected water can be used as an alternative to distilled water for steam ironing, but dirt residues should be removed with a filter first.

Cleaning the Condenser: The condenser should be cleaned periodically.

Open the condenser door.
Unlock the condenser cover by turning the locks.
Remove the condenser cover.
Remove any fluff or debris from the condenser.
Reinstall the condenser cover and lock it.
Close the condenser door.

Cleaning the Drum: Clean the inner surface of the drum and drum ribs with a moist soft cloth and a standard neutral soap detergent. Dry the cleaned surfaces thoroughly. Do not use abrasive materials or steel wool, as these can damage the drum.

Cleaning the Control Panel and Housing: Use a moist soft cloth and a standard neutral soap detergent to clean the control panel and housing. Dry the cleaned surfaces with a soft cloth. Avoid using furniture cleaning agents or corrosive cleaning agents.

Cleaning the Airflow Slots: Use a vacuum cleaner to remove any fluff that accumulates in the airflow slots.

Electrolux EDC2086GDW Specifications

General

Door hinge	Left
Control type	Rotary
Display type	LCD
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	134 min
Noise level	64 dB
Drying class	A
Drum capacity	8 kg
Connected load	2800 W
Energy consumption	4.79 kWh
Power consumption (off)	0.55 W
Annual energy consumption	560 kWh