EasyManuals Logo

Electrolux EDC2086GDW User Manual

Electrolux EDC2086GDW
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
The display shows the countdown of the
delay start.
When the countdown is completed, the
programme starts.
10.3 Change a programme
1. Press the on/off button to deactivate
appliance
2. Press the on/off button to activate the
appliance.
3. Set the programme.
10.4 At the end of the
programme
When the programme is completed:
An intermittent acoustic signal
operates.
The indicator flashes.
The indicator
flashes.
The Start/Pause indicator is on.
The appliance continues to operate with
the crease guard phase for
approximately other 30 minutes.
The crease guard phase removes
creases from your laundry.
You can remove the laundry before the
crease guard phase is completed. We
recommend, for better results, that you
remove the laundry when the phase is
almost completed or completed.
When the crease guard phase is
completed:
The indicator is on but does not
flash.
The indicator is on but does not
flash.
Start/Pause indicator goes off.
1. Press the on/off button to deactivate
the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Always clean the filter and
empty the water container
when a programme is
completed.
10.5 Stand-by function
To decrease the energy consumption,
this function automatically deactivates
the appliance:
After 5 minutes if you do not start the
programme.
After 5 minutes from the end of the
programme.
11. HINTS AND TIPS
11.1 Preparing the laundry
Close the zippers.
Close the fasteners of the duvet
covers.
Do not keep ties or ribbons loose (e.g.
apron ribbons). Tie them before you
start a programme.
Remove all items from the pockets.
If an item has the internal layer made
of cotton, turn it inside out. Make sure
that the cotton layer is always external
We recommend that you set the
correct programme applicable for the
type of fabrics that are in the
appliance.
Do not put fabrics with strong colours
together with fabrics with light colours.
Strong colours can bleed.
Use an applicable programme for
cotton jersey and knitwear to prevent
the items to shrink.
Make sure that the laundry weight is
not more than the maximum weight
that is in the programme table.
Dry only the laundry that is applicable
for tumble dryer. Refer to the fabric
label on the items.
ENGLISH 13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Electrolux EDC2086GDW and is the answer not in the manual?

Electrolux EDC2086GDW Specifications

General IconGeneral
Door hingeLeft
Control typeRotary
Display typeLCD
Loading typeFront-load
Drying systemCondensation
Product colorWhite
Built-in displayYes
Appliance placementFreestanding
Cycle time134 min
Noise level64 dB
Drying classA
Drum capacity8 kg
Connected load2800 W
Energy consumption4.79 kWh
Power consumption (off)0.55 W
Annual energy consumption560 kWh
Weight and Dimensions IconWeight and Dimensions
Width600 mm
Height850 mm

Related product manuals