- 4 -
03.2004 R.K. 599 519 400 EN
Safety Instructions
Attention: Whenever intervention into the machine becomes necessary, observe all safety
precautions mentioned in DIN/VDE 0701 (repair-related) and/or VDE 0700/ICE 65 (appliance-
related).
Components are in accordance with IEC and/or VDEdirectives! For replacements use parts of
the same specification only.
With control systems provided with MOS modules, use parts of the same specification only.
Observe all MOS regulations when handling MOS components
Only carry out mechanical repairs or checks of mechanical components when these are dead.
2. Electrical connection
A licensed electrical fitter should install the connection
to the mains!
The appliance is provided with a power cable 3 x 1 mm2 with
injection-moulded plug (type 13).
You should connect the dishwasher to the mains by means of
a plug, or an all-polo-switch of a minimum of 3mm contact
distance should be provided within the fixed installation for
isolation from the mains.
Installation on the part of the customer:
Install fuse, feeder and socket according to the wiring
schematic.
Circuit: Radiator voltage 230 V
To Next Page
Loading...