14
Care and Cleaning
Cleaning Condenser
Clean Condenser
When the “Clean Condenser” indicator comes on, follow these
steps to remove and clean the condenser assembly:
1. Open the dryer door and locate the condenser access door
latch release.
2. While pressing release, open the condenser access door.
3. Rotate the two latches to lower the condenser screen.
4. Grab the condenser handle and pull straight out.
5. Rinse condenser in sink. Clean with mild soap and water if
necessary.
6. Push condenser back in place, close retention panel, rotate
latches and close condenser access door until it latches.
To Next Page
Loading...
