Care and Cleaning
Cleaning Condenser
Clean Condenser
When the “CLEAN CONDENSER” indicator
comes on, follow these steps to remove and
clean the condenser assembly:
1. Open the dryer door and locate the top of
the condenser access door.
2. Pull the condenser access door toward
you to open.
3. Rotate the two latches as shown to lower
the retention panel.
4. Grab the condenser handle and pull
straight out.
5. Rinse condenser in sink. Clean with mild
soap and water if necessary.
6. Push condenser back in place, close
retention panel, and rotate the two latches
back down into the 6 o’clock position.
Close the condenser access door.
1
1
Top of condenser access door
16
To Next Page
Loading...
