Gettin rted 5
SETTINGCLOCKATPOWERUP
[] [] [] [] II [] [] n [] [] [] l [] [] [] [] [] [] [] [] [] []
When the unit is first plugged in, or when the power supply to the range has been interrupted,
the timer in the display will flash with {d2:00>>. The clock cannot be set when the oven is
on. tf an invalid time of day is entered, the control will triple beep to prompt you to re-enter
a valid time of day.
To set the clock (example for 1:30)"
1. Press pads to set the time of day to 1:30. The pads hi or (ocan also be pressed
to raise or lower the actual time displayed.
2. Press START _ to accept the changes or CANCEL (_ to start with a time of 12:00.
TEMPE TURE V)SUALDISPLAY
[] [] [] [] [] [] [] ! [] ! [] [] [] [] [] [] [] [] [] [] [] []
Your oven is equipped with atemperature visual display for each oven. When a cooking mode
is set, the actual temperature wilt be shown in the display and will rise as the unit preheat.
When the unit has reached its target temperature, a chime will sound to remind you to place
the food in the oven. This feature will be active with some cooking modes; bake, convection
bake and convection roast. The cooking modes which does not feature the temperature visual
display will be noted in their descriptions.
NOTE: The lowest temperature that can be displayed is 100°K
To Next Page
Loading...
