Electrolux EI30ES55JSB - Settingclockdisplay- on or off; Settingtimeof Day - 12 or 24 Hours; Settingtemperature Display- °F or °C; Energysaving

:34 Electronic Control Settings
USERPREFERENCESICONT_NUED)
[] [] [] [] [] II II [] [] [] [] [] [] [] [] II II II II [] [] III
SETTINGCLOCK D_SPLAY-- ON OR OFF
The oven control can be programmed to display the time of day or not. The oven has been
preset at the factory to display the time of day.
Changing chockdisp¢l_ between ON and OFF:
1. Press USER PREF _'_J until you get to the CLO on menu page.
4-
2. Press moor hi to toggle between displaying or hiding the clock.
3. Press START {I,1_to accept the changes and go back to user preferences menu display.
SETTINGT_MEOF DAYDISPLAY- i2 OR24 HOURS
The oven control can be programmed to display time of day in 12 hours or 24 hours mode.
The oven has been preset at the factory to display in 12 hours mode.
Changing between 12or 24 hourtime ofday display:
1_ Press USER PREF _) until you get to the CLO 12hr menu page.
4-
2 Press lo or hi to toggle the display of the clock in 12 or 24 hours.
3. Press START _ to accept the changes and go back to user preferences menu display.
4. Remember to set your clock after changing the time of day display mode.
SETTINGTEMPE_TURE DISPLAY- FAHRENHEFOR
The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The
oven has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit:
1. Press USER PREF _ until you get to the F-C F menu page.
4-
2. Press hi or Io to toggle between the °C and °F display options.
3. Press START ¢ to accept the changes and go back to user preferences menu display.
SE_ING CONTINUOUSBAKE OR 12 HOURENERGYSAVING
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut
off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven
can be programmed to override this feature for Continuous Baking.
Changing between 12 hour energy saving and continuous bake:
1. Press USER PREF _) until you get to the E S menu page.
2. Press hi or Io to toggle the energy saving setting on and off.
3. Press START £,_ to accept the changes and go back to user preferences menu display.