EasyManua.ls Logo

Electrolux EI32AF80QSA - Lighting

Electrolux EI32AF80QSA
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Pure Advantage TM Air
Filter
Your new Pure Advantage TM air filter is
........................................................located inside one of the 2-Liter Door Bins.
..................................................The air filter cover is located on the upper
............................................right side of the control box. in general,
you should change the air filter with
Part Number "EAFCBF" every 6 months
to ensure optimal filtering of freezer
odors. The replacement air filter can be
purchased on the Electrolux website
(http://www.electroluxappliances.com)
or call toll free in the U.S. and Canada:
1-877-4ELECTROLUX (1-877-435-3287).
........................................................................Your electronic control is equipped with a
ii!
..................................................................Change Filter indicator to remind you to
change your filter. See "Replace Air Filter".iiiii!
To Install Or Replace The Air
Filter
Pull down on the front of the Pure
Advantage TM air filter cover. This
releases the hinged bottom cover to
drop open.
Remove the old filter and discard it.
Unpackage the new filter and place it
inside the hinged bottom cover of
the housing.
Push the hinged bottom cover
upward until the tab snaps into
closed position.
Open air filter cover
Luxury Design TM Lighting
The interior cabinet lighting features LED
lights that gradually ramp up in intensity
after the door is opened.
To replace art LED:
1. Unplug the electrical cord or switch
OFF the power supply breaker.
2. Push down on the LED cover and then
pull away from the cabinet interior.
3. From the inside of the LED cover,
remove the wire harness connector
by pressing on the latch with a small
flat-bladed screwdriver. Pull the wire
harness connector out of the LED.
4. Replace with a new LED and install in
the reverse order.
Remove air filter

Related product manuals