Solutions to Common Problems
Concern _Potential Cause _Comrnon Solution
Door will not • Appliance is not level. It • This condition can force the cabinet
'"'"'"'"................................................................dose. rocks on the floor when out of square and misalign the door.
,,,,,,,,,,,,,,,..........................................................it is moved slightly. Refer to the "LEVELING" section.
.....................................................................• FIooris uneven orweak. • Ensure floor can adequately
.................................................................. support appliance. Level the
................................................................ appliance by putting wood or
'"'"'"'"'"'"'"'"'".................................. metal shims under part of the
_iiii _liance.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;,Light bulb is not on. • The LED or light bulb is • Follow directions under the "Luxury
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;, burned out. Design TM Lighting" section.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiil • No electric current is • See"APPLIANCE DOESNOTRUN".
...............................'ii......
reaching the appliance.
Control is in Sabbath
mode (Sb is displayed
on control)
Depress TEMP MODE key and
CONTROL LOCK key for
3 seconds.
To Next Page
Loading...
