Electrolux EN18WI30LS - Specifications;Performance Table

2. Specifications/Performance Table
Specifications
Specification
EN18WI30LS EP18WI30LS
Indoor Wall Mounted
Direct Ignition
15-150 psi
0.5 GPM (2 L/min.)
24.2" (615mm) x 18.3" (464mm) x 9.4" (240mm)
58 lbs.
0.5 Gallon (1.8L)
3/4"
3/4”
3/4”
1/2” Threaded
120 VAC (60Hz)
73W 78W
Freeze Prevention 213W
Zincified Steel Plate/Polyester Coating
PVC
Copper Sheeting, Copper Tubing
Stainless Steel Sheeting, Stainless Steel Tubing
Flame Rod, Thermal Fuse, Lightning Protection
Device (ZNR), Overheat Prevention Device, Freezing
Prevention Device, Fan Rotation Detector
Remote Controller, Remote Controller Cord,
Anchoring Screws
Item
Model Name
Type
Ignition
Operating Pressure
Minimum Flow Rate
Dimensions (Height) x (Width) x (Depth)
Weight
Water Holding Capacity
Accessories
Installation
Air Supply/Exhaust
Connection Sizes
Power Supply
Materials
Water Inlet
Hot Water Outlet
Gas Inlet
Condensate Drain
Safety Devices
Casing
Flue Collar
Primary Heat Exchanger
Secondary Heat Exchanger
Supply
Consumption
Power Vented
EN18WI30LS, EP18WI30LS
EN19WI30LS, EP19WI30LS
Installation Indoor,
Wall Mounted
Air Supply/Exhaust
Connection Sizes Water Inlet
Hot Water Outlet
Gas Inlet
Power Supply Supply
81W
83W
Materials Casing
Flue Collar
Heat Exchanger
0.5 GPM
24.4"(Height) x 18.3"(Width) x 9.4"(Depth)
0.5 Gallon
3/4"
Power Vented
Direct Ignition
15- 150 psi
Type
Item
Ignition
Operating Pressure
EN19WI30LS EP19WI30LS
68 lbs.
3/4"
3/4"
120 VAC (60Hz)
Freeze Prevention 223W
PVC
Copper Sheeting, Copper Tubing
Flame Rod, Thermal Fuse, Lightning Protection Device (ZNR), Overheat Prevention
Device, Freeze Prevention Device, Fan Rotation Detector
Anchoring Screws
Model Name
Safety Devices
Accessories
Minimum Flow Rate
Dimensions
Weight
Water Holding Capacity
Consumption
4