electrolux 31
Installation Instructions
1 Attention: The new appliance may only
be installed and connected by a regis-
tered expert.
Please comply with this. If you do not,
any damage resulting is not covered by
the warranty.
1 Safety information for the in-
staller
• The electrical installation is to be set up
so that the appliance can be isolated
from the mains with a minimum 3mm all-
pole contact separation.
Suitable separation devices include e.g.
cut-outs, fuses (screw fuses are to be
taken out of the holder), RCD’s and con-
tactors.
• Anti-shock protection must be provided
by the installation.
• The built-in unit must meet the stability
requirements of DIN 68930.
• Built-in ovens and built-in cooking sur-
faces are fitted with special connection
systems. For safety reasons, they must
only be combined with appliances from
the same manufacturer.
To Next Page
Loading...
