Problem Possible cause Remedy
The oven does not heat
up.
The clock is not set. Set the clock. Refer to
"Setting the time of day".
The oven does not heat
up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The oven does not heat
up.
The automatic switch-off
is on.
Refer to "Automatic
switch-off".
The oven does not heat
up.
The fuse in the fuse box
is released.
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The oven lamp does not
operate.
The oven lamp is defec-
tive.
Replace the oven lamp.
The core temperature
sensor does not operate.
The plug of the core tem-
perature sensor is not
correctly installed into the
socket.
Put the plug of the core
temperature sensor as far
as possible into the sock-
et.
The oven does not heat
up. The display shows
Demo.
The demo mode is acti-
vated.
1.
Deactivate the appli-
ance.
2.
Press and hold the
button +.
3.
When an acoustic
signal sounds, turn
the knob for the oven
functions to the first
function. Demo
flashes in the display.
4.
Turn the knob for the
oven functions to the
off position.
5.
Release the button +.
6.
Turn the knob for the
temperature clock-
wise for three sec-
onds. The acoustic
signal sounds three
times. The demo
mode is deactivated.
The display shows an er-
ror code.
There is an electronic
fault.
1.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
2.
If the display shows
the error code again,
contact the service
centre.
ENGLISH 35
To Next Page
Loading...
