Problem Cause and remedy
The water leaks out of the
cavity embossment.
There is too much water
in the cavity emboss‐
ment. Deactivate the ap‐
pliance and make sure it
is cold. Wipe the water
with a cloth or a sponge.
Add the correct amount of
water. Refer to "Daily
use", Setting the function:
True Fan Cooking PLUS.
Unsatisfying cooking per‐
formance of the function:
True Fan Cooking PLUS .
The cavity embossment
is not filled with water.
Add the correct amount of
water. Refer to "Daily
use", Setting the function:
True Fan Cooking PLUS.
The lamp does not work. The lamp is burnt out.
Replace the lamp. Refer
to "Care and cleaning",
Replacing the lamp.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is located
on the front frame of the appliance. It is
visible when you open the door. Do not
remove the rating plate from the appliance.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
13. ENERGY EFFICIENCY
13.1 Product Information Sheet and Product Information according to EU
Energy Labelling and Ecodesign Regulations
Supplier's name Electrolux
Model identification EOD3H70X 949499337
Energy Efficiency Index 95.3
Energy efficiency class A
Energy consumption with a standard load, conventional mode 0.93 kWh/cycle
Energy consumption with a standard load, fan-forced mode 0.81 kWh/cycle
Number of cavities 1
Heat source Electricity
Volume 72 l
Type of oven Built-In Oven
Mass 29.9 kg
IEC/EN 60350-1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Meth‐
ods for measuring performance.
16 ENGLISH
To Next Page
Loading...
