• When the appliance has a
malfunction, the red light flashes.
Beam-on-Floor is off when
the appliance is deactivated.
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle is finished,
check the control panel.
4. CONTROL PANEL
1
On/off button
2
Display
3
Programme selection button
4
AUTO programme button
5
Delay button
6
Extra Hygiene button
7
Extra Power button
8
Glass Care button
9
Indicators
4.1 Indicators
Indicator Description
Salt indicator. It is on when the salt container needs refilling. It is al‐
ways off while the programme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐
ing. It is always off while the programme operates.
5. PROGRAMMES
The numbering of the programmes in the table (P1, P2, etc.) reflects their sequence
on the control panel.
The order of the programmes in the table may not reflect their sequence on the control
panel.
Programme Dishwasher
load
Degree of
soil
Programme phases Options
P1
ECO
1)
Crockery,
cutlery, pots,
pans
Normal,
lightly
dried-on
• Prewash
• Dishwashing 50 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry
2)
• Extra Power
• Glass Care
• Extra Hygiene
ENGLISH 7