ENGLISH 21
The softener amount used must not
exceed the "MAX" mark in the drawer.
If you use thick softeners it is
recommended to dilute with water.
Residues of detergent, softener and
water may remain in the dispenser. It is
recommended to clean the dispenser
regularly to remove any residue.
1. If you want your laundry to be spun
or use temperature different from
the one proposed by the machine,
press "Spin" and "Temp" touchpads
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
9.3 Options Setting
- Measure out the amount of
detergent required, pour it into the
"Main wash" compartment
.
- If required, pour fabric softener into
the compartment marked
.
- Close the drawer gently.
Different functions can be combined
which is dependent on the programme
selected.
If an option is not compatible with the
wash programme selected, the symbol
"
" will flash on display along with
buzzer sound.
2. If you want to define the end of the
washing programme, press the "Finish
In" touchpad repeatedly to choose
your machine delay time.
9.4 Starting A Cycle ( )
9.5 Interruption Of A Programme
To start a programme, press the Start/
Pause touchpad. The corresponding
pilot light will stop flashing and a default
programme duration will be displayed on
the screen.
After approx. 15 minutes from the start of
a programme:
• The appliance will automatically
adjust the selected programme
duration according to the type and
size of the load.
• The display will show adjusted
programme duration.
• To pause, press Start/ Pause.
The indicator will start flashing.
• Press the Start/Pause again.
The programme will continue.
If you press any touchpad while a
programme is operating, the symbol
"
" will flash on display along with
buzzer sound.
To Next Page
Loading...
