ENGLISH 27
12.1 External Cleaning
12.2 Descaling
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
The water we use normally contains lime.
It is a good idea to periodically use a
water softening powder in the machine.
Do this separately from any laundry
washing, and according to the softening
powder manufacturer's instructions.
This will help to prevent the formation of
lime deposits.
12. CARE AND CLEANING
WARNING!
You must DISCONNECT the appliance
from the electricity supply, before
you can carry out any cleaning or
maintenance work.
CAUTION!
Do not use alcohol, solvents or
chemical products.
12.3 After Each Wash
12.4 Maintenance Wash "Tub Clean
programme
• The drum should be empty of laundry.
• Select the "Tub Clean" programme.
• Press Start/Pause to start the
programme.
Leave the door open for a while. This
helps to prevent mould and stagnant
smells forming inside the appliance.
Keeping the door open after a wash will
also help to preserve the door seal.
With the use of low temperature washes
it is possible to get a build up of residues
inside the drum.
We recommend to use "Tub Clean"
programme to clean the drum regularly
to remove any residue.
To run a maintenance wash:
12.5 Cleaning The Dispenser Drawer
The washing powder and additive
dispenser drawer should be cleaned
regularly.
Remove the drawer by pressing the catch
downwards and by pulling it out.
The Figures that take place in this
manual are schematic and may not
correspond exactly with your product.
If the subject parts are not included in
the product you have purchased, then it
is valid for other models.
To aid cleaning, the top part of the
additive compartment should be
removed.
To Next Page
Loading...
