16 ENGLISH
7. OPTIONS AND SETTINGS
7.1 Options
Temperature Touchpad
Press this touchpad repeatedly
to increase or decrease the wash
temperature if you want your laundry to
be washed at a temperature different
from the one proposed by the machine.
(Symbol "
" corresponds to cold wash)
Spin Selection Touchpad
Press this touchpad repeatedly to
increase or decrease the spin speed
or select Rinse Hold, if you want your
laundry to be spun at a speed different
from the one proposed by the machine.
• No Spin (
)
No spin option eliminates all the spin
phases and increase the number of
rinses.
• Rinse Hold (
)
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent the
laundry creases.
The door is still locked to indicate that
the water must be emptied out.
The door stays locked with the water in
the drum. To continue the cycle, you must
press
(Start/Pause).
Hygienic Care Touchpad ( )
Select this option to add approximately
30 minutes of tumbling in vapour after the
rinse cycle. The indicator of this option
will be on.
• Vapour may not necessarily be visible
inside the drum during a vapour cycle.
Vapour is created below the drum
and allowed to naturally rise into the
clothes.
• Vapour may not be present during the
entire vapour cycle.
If Vapour option is selected, rinse
temperatures will be elevated.
During a vapour cycle, you may notice
vapour exiting from the drain hose of
the machine, this is normal and there is
no cause for alarm.
Extra Rinse Touchpad ( )
This option is recommended for people
who are allergic to detergents, and in areas
where the water is very soft.
Press this touchpad to add two rinse
phases to a programme. The indicator of
this option will be on.
Select this option if you wish your laundry
to be pre-washed before the main wash.
Use this option for heavy soil. The option
increases the programme duration.
When you set this function, put the
detergent into the prewash compartment.
This function increase the programme
duration.
Prewash Touchpad ( )
• At the end of the Vapour cycle, the
clothes will be warmer, softer and
detached from the drum.
Finish In Touchpad ( )
Before you start the programme, this
option makes it possible to define the
end of the washing programme from
minimum of 1 hour to maximum of 20
hours.
If programme duration is longer
than 3 hours, minimum Finish In option
starts from 4 hours.