22
www.electrolux.com
4. Press the two levers and pull
forward the drainage duct to
let the water flow out.
5. When the container is full of
water, put the drainage duct
back again and empty the
container. Do steps 4 and 5
again and again until no more
water flows out from the drain
pump.
6. Pull back the drainage duct
and turn the filter to remove it.
7. Remove fluff and objects from
the pump (if there are any).
8. Make sure that the impeller of
the pump can turn. If this does
not occur, contact the service
centre.
1
2
9. Clean the filter under the water
tap.
To Next Page
Loading...
