User
Max. 5 m
Remote control
Portable AC
TURNING THE UNIT ON
Remove the cover at the back of the
remote control�
Insert the provided batteries correctly(see
the instructions inside the battery
compartment)�
Close up the cover�
To replace the old batteries(which have
been used up)
Battery Installation and Important
Instructions
How to Use the Remote Control
7.2
Remote Control
1
2
5
9
3
7
4
8
6
10
Remote Control screen
Timer on button
Mode button
Fan Speed button
Timer off button
°F/°C button
Sleep button
Swing button
Temp/Timer setting button
On/Off button
with two new R03P “AAA” 1�5V batteries,
repeat the steps above�
If the remote control unit is replaced or
discarded, the batteries must be removed
and disposed of in accordance with
local legislation as they do harm to the
environment�
Do not mix old and new batteries�
Do not mix alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium)
batteries�
Do not dispose of batteries in re� Batteries
may explode or leak� If the remote control
is not used for a long time, remove the
batteries from the remote control�
The remote control must be handled with
extreme care� Do not drop it or expose it
to direct sunlight or sources of heat�
This device complies with Part 15 of the
FCC Rules� Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation�
Point the remote control at the location
of the signal receiver� The remote control
must be no more than 16 ft(5 meters)
away from the unit (without obstacles
between the remote control and the unit)�
To Next Page
Loading...
