Step 6
Hold the door glass panels on their top edge one by one and pull them
up out of the guide.
Step 7 Clean the glass panel with water and soap. Dry the glass panel careful‐
ly.
Step 8 When the cleaning is completed, do the above steps in the opposite se‐
quence.
Step 9 Install the smaller panel first, then the larger and the door.
Step 10
Make sure that you put the glass panels (C, B and A) back in the cor‐
rect sequence. First, insert panel C, which has a square printed on the
left side and a triangle on the right side. You will also find those sym‐
bols embossed on the door frame. The triangle symbol on the glass
must match the triangle on the door frame, and the square symbol must
match the square. After that insert the other two glass panels.
WARNING!
Make sure that the glasses are inserted in the correct position
otherwise the surface of the door may overheat.
39/56
CARE AND CLEANING
To Next Page
Loading...
