You can enable and disable the reminder in the menu: Setup.
11.5 How to remove and install: Door
You can remove the door and the internal glass panels to clean it. The number of glass panels
depends on specific model.
The door is heavy.
Step 1 Open the door fully.
Step 2
Fully press the clamping levers (A) on the two door hinges.
Step 3 Close the oven door to the first opening position (approximately 70° an‐
gle).
Step 4
Hold the door trim (B) on the top edge of the door at the two sides and
push inwards to release the clip seal.
Step 5 Pull the door trim to the front to remove it.
38/56
CARE AND CLEANING