EasyManua.ls Logo

Electrolux LKR540200W - 3. INSTALLATION; 3.4 Anti-tilt protection

Electrolux LKR540200W
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
For minimal distances for fitting check
the table.
A
C
B
Minimum distances
Dimension mm
A 400
B 650
C 150
3.2 Technical data
Voltage 230 V
Frequency 50 - 60 Hz
Appliance class 1
Dimension mm
Height 858
Width 500
Depth 600
3.3 Levelling of the appliance
Use small feet on the bottom of
appliance to set the appliance top
surface level with other surfaces.
3.4 Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
CAUTION!
Make sure you install the
anti-tilt protection at the
correct height.
Make sure that the surface
behind the appliance is
smooth.
You must install the anti-tilt protection. If
you do not install it, the appliance can tilt.
Your appliance has the symbol shown on
the picture (if applicable) to remind you
about the installation of the anti-tilt
protection.
www.electrolux.com8

Related product manuals