■ ■ ■
EAP300, EAP450
Occurrence Possible causes/solution
No, however you can manually push to the fan speed you prefer which
will stay at that speed until you change it.
Unit makes a ticking sound.
on, the function is working.
The remote control does not work. Make sure the remote control battery is inserted correctly.
Replace a worn-out battery.
Make sure that the remote control has a clear line of sight to the air cleaner.
■ ■ ■
EAP450
Occurrence Possible causes/solution
The air quality light is white, but there
is still dust/odour in the air.
Make sure the sensor is not blocked or clogged.
The unit seems to produce odors.
There is still some dust you can see in
the air or on my furniture.
The unit will capture most dust and particles, however with opening doors,
windows, central HVAC etc, there may still be some level of dust that you can see.
The unit is running on high all the
time.
Clear the sensor with a vacuum cleaner, as it may be blocked or clogged.
Sometimes a compressed can of air may unclog the dust in the sensor.
The CHECK FILTER indicator remains
lit after replacing the Filter Cassette.
Press the RESET FILTER button by gently inserting a paper-clip into the
RESET FILTER button hole. Hold for 3-5 seconds until a “beep” sounds to
indicate the unit has been reset.
Recycle the materials with the symbol .
Put the packaging in applicable containers to recycle it.
Help protect the environment and human health and to
recycle waste of electrical and electronic appliances.
Do not dispose appliances marked with the symbol
with the household waste. Return the product to your
local recycling facility or contact your municipal oce.
43
To Next Page
Loading...
