Cleaning the indoor unit and remote
controller
It is necessary to stop the air conditioner and
disconnect the power supply before cleaning.
WARNING
Filter Handle
Thinner
Use a dry cloth to wipe the indoor unit and
remote controller.
A cloth dampened with cold water may be
used on the indoor unit if it is very dirty.
The front panel of the indoor unit can be
removed and cleaned with water. Then wipe
with a dry cloth.
Do not use a chemically treated cloth or
duster to clean the unit.
Do not use benzine, thinner, polishing powder,
or similar solvents for cleaning. These may
cause the plastic surface to crack or deform.
CAUTIONS
No
Household
Drain
Cleaner
16
Cleaning and maintenance
A clogged air filter reduces the cooling efficiency of this
unit. Please clean the filter once every 2 weeks.
1. Lift the indoor unit panel up to an angle until it stops
with a clicking sound.
2. Take hold of the handle of the air filter and lift it up
slightly to take it out from the filter holder, then
pull it downwards.
3. Remove the AIR FILTER from the indoor unit.
Clean the AIR FILTER once every two weeks.
Clean the AIR FILTER with a vacuum cleaner
or water, then dry it in cool place.
Cleaning the air filter
To Next Page