Electrolux SPEEDELIGHT - PROGRAM SETTING Multiphase (contd.); STOP CYCLE OPTION SETTING; UPPER PLATE AND GLASS TEMPERATURE SETTING

28
PROGRAM SETTING Multiphase (cont'd.)
14 TIME MICROWAVE
(Mw)
For the next steps, please
refer to points 5 – 6 – 7 of
PROGRAM SETTING -
Single Phase table.
NOTE!
In the Multiphase cycle the MW can be set only
for one phase of the cycle (ON / OFF on the
display).
The MW duration time ranges from a minimum
of 15 seconds to a maximum of 1 minute.
The duration time of MW + plates = 4 minutes
maximum.
To eliminate the phase with the MW is necessary
to set OFF and then reset the time.
UPLOAD / DOWNLOAD APPLIANCE AND PROGRAM
SETTING INTO/FROM USB KEY
1 2
For their setting see J.4 Basic settings chapter.
START MODE SETTING
1 2
1
3
2
4
1. With lid closed, the cooking program starts.
2. When you press the required program, the cooking program starts.
STOP CYCLE OPTION SETTING
1 2
1
3
2
4
5
3
1. Appearance time of STOP button (from 1s to 9s).
2. STOP option available on the display.
3. STOP option unavailable on the display.
UPPER PLATE AND GLASS TEMPERATURE SETTING
1 2
3 4
5 6
7 8
Mw
ON
9
s
YE S
9
s
x 9
NO
230C221 C
230C221 C
22 5°
C
230C221 C
22 5°
22 5°