Electrolux TD60 - E10 Incorrect Programming Analysis

50
Troubleshooting
E 10 - Incorrect programming
Error description
This error occurs when the parameter set-up is inconsistent.
Note!Whenresettingthecircuitboardtheuseradjustedprogramsdisappearandneed
reprogramming.
The dryer stops operating.
Error analysis
E – 10
Replace the PCB
Re-enter user-desired parameter
settings (time per push/coin, for
example). These are erased
when factory defaults are
restored.
NO
YES
1. Enter the service
program.
Set Menu 10-1 to "1"
to restore all factory
settings.
All user-desired
programming will be
overwritten.
Exit programming
mode and attempt to
operate the dryer.
Does the E10 return?