Electrolux TD60 - E13 Drying Error Time Program Analysis

53
Troubleshooting
E 13 - Drying error with time program
Error description
Error code E13 occurs with Payment systems where the customer or system has
requested a longer drying time than the allowed 90 minutes (factory setting on the
dryer).
Error code is not displayed but is registered in the error log.
Error analysis
E – 13
CP ESS
Incorrect payment system
set-up (max. 90 min.) or
defective PCB.
Check that there are no
errors on the connected
payment system or
harness and correct these.
NO
YES
Is the
connection
between P22
on PCB and the
payment system
disconnected?
1. Which type
of payment
system?
Incorrect payment system
setup (Max. 90 min.)
LM10