Electrolux Unic Tango Ace - Front Panel Replacement; Component Removal and Disconnection



Tools:
-Phillips screwdriver
-Flat screwdriver
Remove the cup rack and unscrew the 2
front screws of the cup warmer.
Unscrew the 2 screws of the bottom of
the front panel.  so it does
not fall o󰀨.
Masse
Câble USB
Câble de liaison
Remove the grille and disconnect the 3
connectors.
Connecteur ventilateur
Unscrew the 4 screws and disconnect
the fan connector.
Remove the support plate from the grille
1 2
3 4
5
Unscrew the 4 screws from the top of the
grille
6