Electrolux Unic Tango Ace - Page 16

16
Tango 0060 5-2021
Reinstall Piston
Tighten screws, Attach
plugs & Co󰀨ee Line
Replace Turntable shaft
Slide coupler up
Slide O-ring up to notch
Transfer Motor
Rotate shaft of new Piston
part-way down rst!
Rotate to the right to remove
Remove piston halfway
Unplug piston motor wires
Tango Brewing Piston Exchange
Slide piston down
Orient motor at this angle
Clamp must be on the left
with the screw facing out
Tighten screw rmly
Reattach motor wires!
Polarized 1/8’ & 1/4” plugs
Turn shaft
partway down
!
New Piston
19
18
22
2321
20
26
25
24
Lubricate
O-ring with
Molykote 111