Electrolux Unic Tango Ace - Page 20

20
Tango 0060 5-2021
Remove the Bottom
Plate, Threaded Follower,
and Spring
Remove Screen, Seals,
and Spacers
Soak the dirty parts in
co󰀨ee cleaner
Pull the brew chamber o󰀨
of the piston
Remove outlet nipple
12 mm wrench
Remove the 3 mm Allen
screws from the lower plate
The spring will decompress!
Remove the piston from
the machine
Unscrew the inner piston
from the jack-screw
Left hand threads!
Use a 1/8” drill bit to clear
co󰀨ee pathways
9
Tango Brewing Piston
Field Service
4
5
32
1
87
6