10
MANUAL ACTIVATION
Whenever the detergent containers are replaced, it
may be necessary to activate the dispensers manually
in order to fill the hoses and eliminate any air.
Simultaneously press the buttons, as shown in the
figures below. If necessary, repeat this operation
several times.
B5 SETTING THE DISPENSERS
All operations should be carried out with the appliance
switched on, the hood open and no cycle selected.
SEQUENTIAL START
Press the indicated buttons simultaneously for 5
seconds:
Display of programming mode:
Initial amount of detergent:
Setting the activation time:
Initial amount of rinse-aid:
Setting the activation time:
DETERGENT DISPENSER RINSE-AID DISPENSER
LEGEND
increase
decrease
confirm or select next parameter
-
+